vboxmanage createmedium disk --filename CRS1.vdi --size 10240 --format VDI --variant Fixed vboxmanage createmedium disk --filename CRS2.vdi --size 10240 --format VDI --variant Fixed vboxmanage createmedium disk --filename CRS3.vdi --size 10240 --format VDI --variant Fixed vboxmanage createmedium disk --filename DATA1.vdi --size 10240 --format VDI --variant Fixed vboxmanage createmedium disk --filename DATA2.vdi --size 10240 --format VDI --variant Fixed vboxmanage createmedium disk --filename DATA3.vdi --size 10240 --format VDI --variant Fixed vboxmanage createmedium disk --filename DATA4.vdi --size 10240 --format VDI --variant Fixed vboxmanage createmedium disk --filename FRA1.vdi --size 10240 --format VDI --variant Fixed vboxmanage createmedium disk --filename FRA2.vdi --size 10240 --format VDI --variant Fixed
vboxmanage modifymedium disk CRS1.vdi --type shareable vboxmanage modifymedium disk CRS2.vdi --type shareable vboxmanage modifymedium disk CRS3.vdi --type shareable vboxmanage modifymedium disk DATA1.vdi --type shareable vboxmanage modifymedium disk DATA2.vdi --type shareable vboxmanage modifymedium disk DATA3.vdi --type shareable vboxmanage modifymedium disk DATA4.vdi --type shareable vboxmanage modifymedium disk FRA1.vdi --type shareable vboxmanage modifymedium disk FRA2.vdi --type shareable
ls -ls /dev/sd* fdisk -c /dev/sdb ### "n", "p", "1", "엔터", "엔터", "w" 입력 fdisk -c /dev/sdc ### "n", "p", "1", "엔터", "엔터", "w" 입력 fdisk -c /dev/sdd ### "n", "p", "1", "엔터", "엔터", "w" 입력 fdisk -c /dev/sde ### "n", "p", "1", "엔터", "엔터", "w" 입력 fdisk -c /dev/sdf ### "n", "p", "1", "엔터", "엔터", "w" 입력 fdisk -c /dev/sdg ### "n", "p", "1", "엔터", "엔터", "w" 입력 fdisk -c /dev/sdh ### "n", "p", "1", "엔터", "엔터", "w" 입력 fdisk -c /dev/sdi ### "n", "p", "1", "엔터", "엔터", "w" 입력 fdisk -c /dev/sdj ### "n", "p", "1", "엔터", "엔터", "w" 입력 ls -ls /dev/sd*
[root@rac1 ~]# ls -ls /dev/sd*
0 brw-rw----. 1 root disk 8, 0 2017-04-15 21:34 /dev/sda
0 brw-rw----. 1 root disk 8, 1 2017-04-15 21:34 /dev/sda1
0 brw-rw----. 1 root disk 8, 2 2017-04-15 21:34 /dev/sda2
0 brw-rw----. 1 root disk 8, 16 2017-04-15 21:34 /dev/sdb
0 brw-rw----. 1 root disk 8, 32 2017-04-15 21:34 /dev/sdc
0 brw-rw----. 1 root disk 8, 48 2017-04-15 21:34 /dev/sdd
0 brw-rw----. 1 root disk 8, 64 2017-04-15 21:34 /dev/sde
0 brw-rw----. 1 root disk 8, 80 2017-04-15 21:34 /dev/sdf
0 brw-rw----. 1 root disk 8, 96 2017-04-15 21:34 /dev/sdg
0 brw-rw----. 1 root disk 8, 112 2017-04-15 21:34 /dev/sdh
0 brw-rw----. 1 root disk 8, 128 2017-04-15 21:34 /dev/sdi
0 brw-rw----. 1 root disk 8, 144 2017-04-15 21:34 /dev/sdj
[root@rac1 ~]# fdisk -c /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x658d8a2c.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -c /dev/sdc
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x44883ea3.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -c /dev/sdd
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xfcfe29e6.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -c /dev/sde
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x30dd34fe.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -c /dev/sdf
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xef83f667.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -c /dev/sdg
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x7a57b10b.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -c /dev/sdh
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x47c3a6b5.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -c /dev/sdi
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x89bcdc27.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# fdisk -c /dev/sdj
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0xf33b9838.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: cylinders as display units are deprecated. Use command 'u' to
change units to sectors.
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1305, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-1305, default 1305):
Using default value 1305
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@rac1 ~]# ls -ls /dev/sd*
0 brw-rw----. 1 root disk 8, 0 2017-04-15 21:34 /dev/sda
0 brw-rw----. 1 root disk 8, 1 2017-04-15 21:34 /dev/sda1
0 brw-rw----. 1 root disk 8, 2 2017-04-15 21:34 /dev/sda2
0 brw-rw----. 1 root disk 8, 16 2017-04-15 21:40 /dev/sdb
0 brw-rw----. 1 root disk 8, 17 2017-04-15 21:40 /dev/sdb1
0 brw-rw----. 1 root disk 8, 32 2017-04-15 21:40 /dev/sdc
0 brw-rw----. 1 root disk 8, 33 2017-04-15 21:40 /dev/sdc1
0 brw-rw----. 1 root disk 8, 48 2017-04-15 21:40 /dev/sdd
0 brw-rw----. 1 root disk 8, 49 2017-04-15 21:40 /dev/sdd1
0 brw-rw----. 1 root disk 8, 64 2017-04-15 21:41 /dev/sde
0 brw-rw----. 1 root disk 8, 65 2017-04-15 21:41 /dev/sde1
0 brw-rw----. 1 root disk 8, 80 2017-04-15 21:41 /dev/sdf
0 brw-rw----. 1 root disk 8, 81 2017-04-15 21:41 /dev/sdf1
0 brw-rw----. 1 root disk 8, 96 2017-04-15 21:41 /dev/sdg
0 brw-rw----. 1 root disk 8, 97 2017-04-15 21:41 /dev/sdg1
0 brw-rw----. 1 root disk 8, 112 2017-04-15 21:41 /dev/sdh
0 brw-rw----. 1 root disk 8, 113 2017-04-15 21:41 /dev/sdh1
0 brw-rw----. 1 root disk 8, 128 2017-04-15 21:41 /dev/sdi
0 brw-rw----. 1 root disk 8, 129 2017-04-15 21:41 /dev/sdi1
0 brw-rw----. 1 root disk 8, 144 2017-04-15 21:41 /dev/sdj
0 brw-rw----. 1 root disk 8, 145 2017-04-15 21:41 /dev/sdj1
cd /media/sf_oracle/grid/rpm rpm -ivh cvuqdisk-* cd /media/sf_oracle rpm -ivh oracleasmlib-*
[root@rac1 ~]# cd /media/sf_oracle/grid/rpm [root@rac1 rpm]# rpm -ivh cvuqdisk-1.0.9-1.rpm 준비 중... ########################################### [100%] Using default group oinstall to install package 1:cvuqdisk ########################################### [100%] [root@rac1 rpm]# cd /media/sf_oracle/ [root@rac1 sf_oracle]# rpm -ivh oracleasmlib-2.0.12-1.el6.x86_64.rpm 경고: oracleasmlib-2.0.12-1.el6.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY 준비 중... ########################################### [100%] 1:oracleasmlib ########################################### [100%]
oracleasm configure oracleasm configure -i oracleasm configure
[root@rac1 ~]# oracleasm configure
ORACLEASM_ENABLED=false
ORACLEASM_UID=
ORACLEASM_GID=
ORACLEASM_SCANBOOT=true
ORACLEASM_SCANORDER=""
ORACLEASM_SCANEXCLUDE=""
ORACLEASM_USE_LOGICAL_BLOCK_SIZE="false"
[root@rac1 ~]# oracleasm configure -i
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: grid
Default group to own the driver interface []: asmadmin
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
[root@rac1 ~]# oracleasm configure
ORACLEASM_ENABLED=true
ORACLEASM_UID=oracle
ORACLEASM_GID=asmadmin
ORACLEASM_SCANBOOT=true
ORACLEASM_SCANORDER=""
ORACLEASM_SCANEXCLUDE=""
ORACLEASM_USE_LOGICAL_BLOCK_SIZE="false"
reboot
oracleasm createdisk CRS1 /dev/sdb1 oracleasm createdisk CRS2 /dev/sdc1 oracleasm createdisk CRS3 /dev/sdd1 oracleasm createdisk DATA1 /dev/sde1 oracleasm createdisk DATA2 /dev/sdf1 oracleasm createdisk DATA3 /dev/sdg1 oracleasm createdisk DATA4 /dev/sdh1 oracleasm createdisk FRA1 /dev/sdi1 oracleasm createdisk FRA2 /dev/sdj1 oracleasm scandisks oracleasm listdisks
[root@rac1 ~]# oracleasm createdisk CRS1 /dev/sdb1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm createdisk CRS2 /dev/sdc1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm createdisk CRS3 /dev/sdd1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm createdisk DATA1 /dev/sde1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm createdisk DATA2 /dev/sdf1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm createdisk DATA3 /dev/sdg1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm createdisk DATA4 /dev/sdh1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm createdisk FRA1 /dev/sdi1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm createdisk FRA2 /dev/sdj1 Writing disk header: done Instantiating disk: done [root@rac1 ~]# oracleasm scandisks Reloading disk partitions: done Cleaning any stale ASM disks... Scanning system for ASM disks... [root@rac1 ~]# oracleasm listdisks CRS1 CRS2 CRS3 DATA1 DATA2 DATA3 DATA4 FRA1 FRA2
